completely refurbished original (two of two) highly sought after early 20th century antique american industrial "sani" factory lunch hall stationary table designed and fabricated for the sani products company, sani building, chicago, il. sani products was formed to merchandize the products of the marietta mfg. co., if indianapolis, ind., and the chicago hardware foundry company, of north chicago, ill. the "no 314" sectional 4-seat swing out type table was salvaged from an old alabama foundry lunch hall. the heavily reinforced industrial table contains two opposed cast iron bases or legs interconnected by a single robust ladder-like girder or stretcher. the simple yet elegantly designed iron swivel brackets are affixed to the original refinished solid maple wood circular seats. the compact tabletop is comprised of old growth pine wood bolted firmly along the underside of the opposed bases, marked either "e" for end or "c" for center. each and every cast iron component has been carefully cleaned, brushed and treated with a clear coat lacquer. the original marble like solid vitrolite glass "sani" tabletops are rarely found with the tables.urban remains carries the largest selection of authentic "sani" swing-out factory tables in the country. please contact about additional tables containing multiple, interchangeable configurations. the tables were constructed in sections of 8, 12, 16 and 24 feet, with each section containing 4 seats. the fine grain cast iron bases were typically finished in a heavy white coat enameled finish. table measures approximately 51 1/2 x 29 x 31 1/2 inches, seat height is 19 inches and with both seats extended the tables width measures 64 inches.